1. Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny. Then evenly heat the area to be welded.
2. As you heat, rub the rod vigorously against the heated area until the rod starts flowing.
3. Please Note: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds.
Low-temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum alloy, cast aluminum, aluminum-magnesium alloy and dissimilar welding between the above metals, even for white metals that have been seriously corroded or contaminated with oil, even those that are considered irreparable. Aluminum alloys can be repaired. It is suitable for all-round welding of the primary welding operator. It only needs a small heating device. The weld strength after welding is generally higher than the strength of the base material itself.
One step: sand the surface by physical cleaning.
Two steps: heating the surface of the base material at the weld until the temperature reaches 380 °C-400 °C, so that the weld can be formed by the heat conduction welding wire of the base metal, avoiding the use of flame welding wire, and only the mother When the surface temperature of the material is sufficient, the wire can flow and penetrate into the metal capillary well.
Three steps:When repairing relatively thin aluminum, the aluminum base material is heated to a suitable working temperature, and then the wire is frictionally melted back and forth to form a weld. Only the metal brush is used to fill the weld to form a weld.
Four steps:Small parts are welded with propane gas, large parts are heated by industrial gas or induction heating device, and naturally cooled after welding.
Melting temperature: < 896°F (480°C)
Application: Aluminum and aluminium alloy welding/brazing
No emitting of gases or toxins, No Lead content included.
Excellent corrosion resistance.
Minimize parent material distortion during welding.
The Easy Welding Rods are high-quality special Aluminum-alloy rods used to weld/braze primarily Aluminum and Aluminum alloys but can be used to braze any other non-ferrous materials except for stainless steel.
Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0
Meant for small repairs, for any repairs that would cause endangerment of safety if not fixed, we recommend to completely replace instead of repairing your parts.
4 GREAT REASONS TO BUY FROM US
We truly believe we carry some of the most innovativeproducts in the world, and we want to make sure we back that up with a risk-free ironclad 90 day guarantee.
If you don't have a positive experience for ANY reason, we will do WHATEVER it takes to make sure you are 100% satisfied with your purchase.
Buying items online can be a daunting task, so we want you to realize that there is absolute ZERO risk in buying something and trying it out. If you don't like it, no hard feelings we'll make it right.
We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.